F-200 ammonia removal agent is a new type of environmentally friendly foaming agent, and its decomposition products do not contain formamide substances and formaldehyde, which are prohibited in Europe and America. When used in combination with high-temperature ADC foaming agent, it can greatly reduce the production of formamide and other substances during the decomposition of ADC foaming agent. It is widely used in the molding and foaming of rubber materials such as EVA, PVC, PE, etc.
1、 Technical parameters:
Product
F200
Appearance
White Powder
Melting point ℃
60-65
Relative Density
0.8-0.9
Component
acid C14
Content
98%Min
2、 Usage suggestion: When using this product, it is recommended to increase the amount of crosslinking agent or vulcanization accelerator by 10-15% (if the amount of crosslinking agent or accelerator is not increased in the formula, it will cause an imbalance in the acidity and alkalinity of the foamed product, and the foamed product will have frost phenomenon), and appropriately extend the molding time. It is best to use talcum powder as the filler
3、 Addition amount: If the foaming agent used in your previous formula was one kilogram, please add F-670/600G F200/200G, If two kilograms of foaming agent are added to the formula, multiply the previous ratio by 2, and so on
4、 Packaging specification: Paper plastic composite bag, 25kg/bag
5、 Storage method: Store in a cool, dry, and ventilated environment to avoid heat and moisture. Shelf life is one year.
Sales Manager
Technical Support
Louise Su Mob:+86 13599992330（Wechat） E-mail:salesreadchem.cn
readchem.cn
